SMOBIO/[QP2320]Q页™ Bis-Tris预制凝胶（迷你型，15孔，12%），10凝胶/迷你型，15孔，12%），10凝胶</span>"},{"src":"</li>","-免疫在线蚂蚁淘旗下平台

当前位置：首页 > 产品中心 > ligase > SMOBIO/[QP2320]Q页™ Bis-Tris预制凝胶（迷你型，15孔，12%），10凝胶/迷你型，15孔，12%），10凝胶"},{"src":"","

商品详细SMOBIO/[QP2320]Q页™ Bis-Tris预制凝胶（迷你型，15孔，12%），10凝胶/迷你型，15孔，12%），10凝胶"},{"src":"","

SMOBIO/[QP2320]Q页™ Bis-Tris预制凝胶（迷你型，15孔，12%），10凝胶/迷你型，15孔，12%），10凝胶"},{"src":"","

商品编号： QP2320

品牌： SMOBIO

市场价： ¥0.00

美元价： 0.00

产地：美国(厂家直采)

公司：

产品分类：连接酶

公司分类： ligase

联系Q Q： 3392242852

电话号码： 4000-520-616

电子邮箱： info@ebiomall.com

立即询价

商品介绍

Description

Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Tris-Glycine gels.

Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.

Key Features

User-friendly gel cassette:
- Numbered and framed wells for sample loading
- Labeled warning sign and green tape as reminder
Enhanced gel performance:
- Enhanced band sharpness
- Better resolution of small proteins
- Stable for shipping at ambient temperature
Easy compatibility:
- Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
- Compatible with most popular protein electrophoresis systems

Storage and stability

Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.

Do not freeze Q-PAGE™ Precast Gels. Remove tape and comb before electrophoresis.

Technical

Clear and sharp bands, high resolution

Q-PAGE™ Bis-Tris Precast Gel shows high resolution of protein separation.

QP2320 Specifications

Gel

Bis-Tris

Buffer systems

MOPS and MES

Features

Clear and sharp bands,

high resolution

Cassette size

Mini Gel

(10 X 8.3 cm)

Gel dimensions

8.1 x 7.4 x 0.1 cm

(W x L x thickness) cm

Electrophoresis system

Bio-Rad systems

Well format &

Capacity

15 wells,

22 μl/well

Gel percentage

12 %

Accessory tray

Production description

Tip card

Gel remover

Cassette opener

Manual

Manual_Q-PAGE™ Bis-Tris Precast Gel, Mini

SDS

SDS_Q-PAGE™ Precast Gel

Migration pattern

Setting Up and Running Q-PAGE™ Mini Precast Gel

Removing Q-PAGE Mini Gel from cassette

Setting up gel/membrane sandwich for Western transfer

Recommendations/Tips for Gel Running

1. Remove comb and tape before adaption. 2. Use fresh 1X running buffer for the inner cathode chamber. 3. Do not use Tris-Glycine running buffer for Q-PAGE™ Bis-Tris Precast Gels. 4. Rinse the wells before sample loading.

Sample Preparation for SDS-PAGE

1. Mix protein sample with 2X sample buffer.  

2. Heat the diluted samples at 95°C for 5 min or at 70°C for 10 min.

3. Cool the diluted samples to 4°C and spin down the water condensed on tube surface. (If there is high viscosity part at bottom of tube, transfer supernatant to a new tube.)

Prepare Q-PAGE™ for Sample Loading

1.Open the blister tray of Q-PAGE™ Precast Gel.

2.Briefly rinse the gel cassette with ddH2O.

3.Remove tape and comb; avoid squeezing the gel.

4.Adapt Q-PAGE™ to electrophoresis system; instruction are provided below. (BioRad Mini-PROTEAN® Core Electrophoresis System is recommended.)

5.Use a pipette to gently wash the wells with running buffer to remove residual storage buffer.

6.Fill the wells with running buffer prior to sample loading.

7.Load samples and pre-stained protein marker into numbered wells.

8.Fill both inner and outer chambers with running buffer to the highest level. Ensure gel wells are completely covered.

Power Setting for Running Q-PAGE™

Optimize the voltage and running time if needed.

130 V

180 V

230 V*2

Running Time*1

45-60 mins

25-40 mins

15-30 mins

Expected Current

Initial (per gel)

Final (per gel)

60-70 mA

20-25 mA

100-110 mA

40-50 mA

130-140 mA

60-70 mA

Expected temperature

25-30°C

25-35 °C

35-45°C

*1 Set voltage higher than 100 V is recommended.

*2 For higher voltage conditions, please use fresh running buffer for inner and outer chambers.

*3 Running time varies depending on gel percentage, running buffer, temperature, and power supply

Remove Q-PAGE™ Gel from Cassette

Open cassette immediately after electrophoresis. Avoid gel drying.

1.Insert the cassette opener into corners of cassette.

2.Sequentially pry the opener to separate the two plates.

3.Gently pull two plates apart from the top of cassette.

4.Carefully detach the gel either from the bottom of gel or the top side of the cassette.

-Avoid diagonally peeling the gel from the corner.

-Use water to help gel detachment if it needed

5.Gently remove the gel for further staining or Western blotting.

Gel Staining Proteins separated using Q-PAGE™ Precast Gels can be further stained with most popular staining reagents, such as Coomassie dyes (R-250 or G-250), Silver-stain solution, and FluoroStain™ Protein Fluorescent Staining Dye. (Cat. No. PS1000)

Transferring Protein from Q-PAGE™ to Blotting Membrane 1. After protein separation using Q-PAGE™, gently detach QPAGE™ from cassette and then equilibrate the gel in transfer buffer. 2. Pre-soak blotting membrane and filter papers in transfer buffer. 3. Assemble transfer sandwich by orientating cathode, sponge, filter papers, gel, membrane, filter papers, sponge, and anode. The protein goes to the direction of cathode to anode. 4. Carefully move roller over the gel/membrane to remove air bubbles and excess buffer until complete contact is established. 5. Insert transfer cassette into transfer module. Notice that black side of cassette should be next to black side of module. 6. Fill transfer tank with pre-cooled transfer buffer to the highest water level. 7. Set constant voltage at 100 V. Transfer for 90 minutes at low temperature condition. Pre-stained protein marker should be visible on the membrane after transfer is completed. Transfer of proteins to the membrane can be checked using Ponceau S staining before blocking step.

Supplemental Information for Using Q-PAGE™ Precast Gel

Adapting Q-PAGE™ Mini Precast Gel to BioRad Mini-PROTEAN® Core 1. After removing comb and tape, place the Q-PAGE™ Mini Precast Gel with notched plate facing toward inner chamber. 2. Align the notched plate to ensure the edge sits just below the notch at the top of green gasket. 3. Gently press gel cassette toward green gasket and then lock gel cassette with two green arms. Avoid squeezing the cassette and gel.

4. Fill inner chamber with running buffer to check tightness of seal. If necessary, reassemble and check the seal again. 5. Fill inner chamber with running buffer to ensure gel wells are completely covered. 6. Fill outer chamber with running buffer to the highest level.

Adapting Q-PAGE™ Mini Precast Gels to other electrophoresis system, please follow the manufacturer’s instruction.

Buffer recipes

2X sample buffer with reducing agent 62.5 mM Tris-HCl pH 6.8, 2% SDS, 25% (v/v) glycerol, 0.01% bromophenol blue, 5% β-mercaptoethanol or 100 mM DTT (added fresh)

10X MOPS running buffer 60.6 g Tris base, 104.6 g MOPS, 10.0 g SDS, 3.0 g EDTA. Bring up the volume to 1 L with ddH2O.

10X MES running buffer 60.6 g Tris base, 97.6 g MES, 10.0 g SDS, 3.0 g EDTA. Bring up the volume to 1 L with ddH2O.

1X running buffer Dilute 100 ml 10X running buffer with 900 ml ddH2O.

10X transfer buffer 30.0 g Tris base, 144.0 g Glycine. Bring up the volume to 1 L with ddH2O.

1X transfer buffer *Cool 1X transfer buffer to 4°C before using. Dilute 100 ml 10X transfer buffer with 200 ml methanol and 700 ml ddH2O. **Add SDS to 0.1% to promote transfer of high molecular weight proteins.

Troubleshooting Guidelines

Problem

Possible Cause

Suggested Solution

Well deformation

Pull one side of comb out of cassette.

Smoothly pull the comb straight out of the cassette.

Bubbles between gel and cassette

Gel has been frozen or stored at wrong temperature.

Store Q-PAGE Precast Gels at 4°C.

Buffer leaking from the inner chamber

Untight assembly of gels to the electrode modules

Reassemble Q-PAGE gels into the electrodemodules.

Fill outer chamber with 1X running buffer to thehighest level.

Samples do not sink into the wells.

Residual gel storage buffer in the wells

Rinse the gel wells with ddH2O or 1X running bufferbefore loading.

Insufficient sample buffer

Use more sample buffer to prepare samples.

Current is zero and sample do not migrate into gel

Tape at bottom of gel not removed

Remove tape

Gels run faster or more slowly than expected.

Incorrect running buffer

Check buffer composition.

Use fresh 1X running buffer for inner chamber.

Crooked bands at middle or bottom of gel

Gel has been frozen or stored at wrong temperature.

Store Q-PAGE Precast Gels at 4°C.

Incorrect running buffer

Check buffer composition.

Use fresh 1X running buffer for inner chamber.

Band pattern curves toward one or both sides of gel.

Buffer leaking from the inner chamber

Check assembly of gels into the electrode modules.

Excessive heating of gel

Check buffer composition. Or dilute running bufferto 0.5-0.75X.

Do not exceed recommended running conditions.

Insufficient buffer in inner or outer buffer chamber

Fill inner and outer chambers to completely covergel wells.

Poor resolution or fuzzy bands

Excessive heating of gel

Check buffer composition.

Do not exceed recommended running conditions.

Incorrect running buffer

Check buffer composition.

Bands are missing on the membrane after Westerntransferring.

Proteins move in the wrong direction

Check the order of gel/membrane sandwich assembly,the direction of transfer cassette in transfer modules, and the polarity ofconnections to power supply.

Swirls or missing bands; bands trail off in multipledirections on the membrane after Western transferring.

Contact between the membrane and the gel was poor;Air bubbles or excess buffer remains between the blotting membrane andthe gel.

Use thicker/more filter paper in the gel/membranesandwich

Remove air bubbles and excess buffer betweengel and membrane by carefully moving the roller over the membrane.

Apparent molecular sizes of prestained proteinmarkers are different as indicated.

Prestained protein markers used have not beencalibrated for use with Q-PAGE gels. Dyes for staining protein markers affect themigration patterns of prestained proteins in different buffer systems.

Calibrate prestained protein markers againstunstained proteins of known size or use SMOBIO’s ExcelBand™ Protein Markers.

Q-PAGE™ Precast Gel

Gel Type

Bis-Tris

TGN (Tris-Glycine-Novel)

Buffer systems

MOPS and MES

Tris-Glycine (Laemmli)

Features

Clear and sharp bands, high resolution

Quick running, clear bands

Cassette size

Mini Gel(10 x 8.3 cm)

Midi Gel(10 X 10 cm)

Mini Gel(10 x 8.3 cm)

Midi Gel(10 X 10 cm)

Electrophoresis system

Bio-Rad systems

Mini Gel Tank

Xcell SureLock,

Hoefer SE260

Bio-Rad systems

Mini Gel Tank

Xcell SureLock,

Hoefer SE260

Well format &

Capacity

12 wells, 25 μl/well

15 wells,22 μl/well

12 wells, 40 μl/well

15 wells, 28 μl/well

12 wells, 25 μl/well

15 wells, 22 μl/well

12 wells, 40 μl/well

15 wells, 28 μl/well

Gel percentage/

Cat. No.

10%

QP2110

QP2120

QP3110

QP3120

QP4210

QP4220

QP5210

QP5220

12%

4-15%

QP2310

QP2320

QP3310

QP3320

QP4510

QP4520

QP5510

QP5520

4-12%

QP2510

QP2520

QP3510

QP3520

ExcelBand™ Protein Markers

Ready-to-use— premixed with a loading buffer for direct loading, no need to boil
Broad range— 310 kDa to 5 kDa
Pre-stained bands — for monitoring protein separation during electrophoresis and Western blotting transferring efficiency on membrane
Enhanced bands— for quick reference

YesBlot™ Western Marker I

Ready-to-use — no need of mixing or heating before sample loading
Direct visualization — 10 IgG-binding proteins for direct visualization on Western blots
Pre-stained bands — 4 pre-stained proteins for monitoring protein separation during electrophoresis and Western blotting transferring efficiency on membrane
Wide range — 10 clear bands from 15 to 200 kDa for size estimation
Quick reference — two enhanced bands (30 and 80 kDa)

FluoroStain™ Protein Fluorescent Staining Dye

Compatible to MASS analysis — compatible to the analysis of mass spectra, such as LC-MS/MS, MALDI-TOF, and etc.
High sensitivity — detection level achieve ~3 ng, similar to silver staining
Substitution of the Coomassie Blue protein staining method

品牌介绍

SMOBIO的B-BOX™是一种长波长蓝光LED落射照明器。它设计紧凑，结构坚固。B-BOX™落射照明器由于其非紫外线光源和低至12伏的低工作电压，并且为非致癌DNA /蛋白质染料提供了工作能力，因此为用户提供了前所未有的安全性。B-BOX™带有高质量的非闪烁LED灯，对DNA和蛋白质染料高度敏感。B-BOX™可以极大地减轻凝胶提取的日常琐事，即使在明亮的环境光下也可以轻松进行可视化和凝胶切割。多角度滤板（目录号VE0102）为凝胶切割，可视化和记录提供了最佳角度。B-BOX™还带有用于过滤和可视化的琥珀色滤镜（目录号VE0103）。Phox™Photobox（目录号 VE0104）为使用任何智能手机拍摄的图像提供了一个迷你暗室环境。最后，工作区域周围的内置屏障系统有助于清洁。特征提高克隆效率紧凑，轻巧和便携式（重量不足1千克）安全功能包括：470 nm长波长，对用户没有任何紫外线辐射危害与非致癌，非溴化乙锭的DNA染料兼容用户友好：样品易于观察（使用滤板或护目镜时） LED光源持续长达50,000小时出色的检测灵敏度：使用FluoroStain™DNA荧光染色染料时，DNA≤0.04 ng，使用FluoroStain™蛋白荧光染色染料时，蛋白≤3ng（与银染一样灵敏）可调和可移动的滤板可进行凝胶切割，可视化和记录内置屏障设计，易于清理在明亮的环境光下可见借助其自身的内置散热器，强调了最小的功率依赖，低发热

公司介绍

品牌分类

DNA梯子蛋白质标记物前盖尔斯 n. 照明者; n. 核酸; cDNA合成和RT-PCR 蛋白质污渍 DNA扩增; n. 无性（繁殖）系化，纯系化;

DNA染料

显示分类

联络我们

服务热线：4000-520-616

（限工作日9:00-18:00）

QQ ：1570468124

手机：18915418616

官网：http://www.smobio.com/